Bathroom organization
Will a wall-mounted hair dryer holder fit beside your vanity?
Check the holder footprint, the space your dryer takes up and the room to lift it out before choosing a spot beside your vanity.

Measure with the dryer you actually store
The Opal Haul holder measures 16 × 11 × 6.5 cm overall, roughly 6.3 × 4.3 × 2.6 inches. Those measurements tell you how much space to reserve for the empty holder. To check fit, unplug your dryer, fit the nozzle or diffuser you usually leave on it, and measure across its widest part. A diffuser can extend beyond the holder even when the dryer handle fits between the arms.
Try the reach before attaching the holder
Hold the unplugged dryer in its planned storage position. Have someone open the nearest cabinet door while you keep the dryer steady. Check the door edge, the barrel and the handle, then lift the dryer as you would on a busy morning. If the handle clears the cabinet but you have to tilt the diffuser sharply to get it out, try a spot with more space above it.
Measure the narrowest gap to the cabinet during that movement. For example, a 17 cm gap gives the 16 cm side of an empty holder just 1 cm to spare. If the stored dryer crosses that edge by 2 cm, the door will catch it. Do the same check with any attachment you plan to keep in the adjacent pocket.
Check the mounting surface and pack count
The holder comes with mounting adhesive. Check the mounting instructions for your wall finish, the supported weight and the waiting time before loading it. The listed exterior dimensions do not establish the spacing between the support arms. If the fit of a wide handle is close, ask for that inner measurement before ordering.
Black, gray and white each come as a single holder or a pair. Choose a single for one vanity. For two bathrooms, measure each spot independently before choosing a two-pack.
